raspberrypi-firmware-extra-2019.11.19-lp151.4.6.1<>,%_/=„~IY+?9E*Aokcq+SڇJu:mȨT dKZ`mG$rn=x?hd( 4 W  @FM $ 0 < T  4hC(x879\7: 7>BFJG`HxIXY\]^b"cdoetfwlyuvz"dCraspberrypi-firmware-extra2019.11.19lp151.4.6.1Extra bootloaders for Raspberry PiThis package provides the console, experimental and debug firmware files for Raspberry Pi_obs-arm-9openSUSE Leap 15.1openSUSESUSE-Firmwarehttp://bugs.opensuse.orgSystem/Boothttps://github.com/raspberrypi/firmware/linuxnoarchif mountpoint -q /boot/efi && [[ ! -L /boot/efi ]]; then for suffix in _cd _db _x; do cp /boot/vc/start${suffix}.elf /boot/efi/ cp /boot/vc/fixup${suffix}.dat /boot/efi/ done fi _&X&X JH9樁]]]]]]591fdeed1dc52a2fa0097442c2d28ff6bcf80221229ac925c1a76db6b4cd41ee822c4fe2380107b0e69aa03ea87d1c43c36e4bb55d24353ed57cdc4fd50cec4d2fab16f4e68d3ab3cad63044a6debd73ca6db804f2d9562beb211bb22f437e589240e1bcdd3406634f18734cf30ff0009b8004809339c03e2c19a4f6bbd7d7592137a5389a50fb06ac8e65b0496e88ffaf7d5b60de3e905df6beb9506ccf236f1c4dbfe0a6ad4f4e701e235012052321314415e0651d7c80203c8e389ba3e391rootrootrootrootrootrootrootrootrootrootrootrootraspberrypi-firmware-2019.11.19-lp151.4.6.1.src.rpmraspberrypi-firmware-extra    /bin/shraspberrypi-firmwarerpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)util-linux2019.11.19-lp151.4.6.13.0.4-14.6.0-14.0-15.2-14.14.1^@ZZZ@ZZqZe@Z[@YY@Yn@XQ@X@XwoX.@XI@W%W_@W_@Wڍ@W֘WίWiW@W@WbWUeWM|W1@W)@W#LW@Vm@Vm@Vm@VՄ@VՄ@VV=@VVf@Vf@VZV0V.VUU@UUJ@Up=TTTTZ@T?@Matthias Brugger agraf@suse.comagraf@suse.comagraf@suse.comagraf@suse.comjengelh@inai.deagraf@suse.comafaerber@suse.deguillaume@opensuse.orgguillaume@opensuse.orgafaerber@suse.demalcolmlewis@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgfvogt@suse.comafaerber@suse.defvogt@suse.comafaerber@suse.dempluskal@suse.commpluskal@suse.comafaerber@suse.dedmueller@suse.comguillaume@opensuse.orgdmueller@suse.comafaerber@suse.deguillaume@opensuse.orgguillaume@opensuse.orgafaerber@suse.deguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgafaerber@suse.deafaerber@suse.deafaerber@suse.deafaerber@suse.deafaerber@suse.deguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgguillaume@opensuse.orgbill@merriam.netguillaume@opensuse.orgguillaume@opensuse.org- Update to 6e4a7232c (2019-11-19): - Add support for CM3+ (bsc#1157822)- Allow user defined config options (bsc#1088356) - Move HDMI workaround to rpi3 section (fixes RPi2 HDMI output)- Update to 3347884 (2018-03-13) - Add support for new RPi3 B+ (bsc#1085262)- Add overlays to match previous U-Boot provided DT - Add Recommends: on dt and config packages- Update to 445b6a8 (2018-02-09)- Avoid bashisms in %post- Merge config.txt files into a single config.txt with subsections - Set GPU memory usage to 32MB, this is enough for vc4 (boo#1074566) - Update to 050175d (2018-01-17)- Add rpi0w sub-package and config (boo#1069828). Derived from rpi3. - Update to abfb4be3e1 (2017-11-17)- Update to a88e126a (2017-10-11)- Update to 8fe001e (2017-08-22)- Update to b038854 (2017-04-04)- Update to 2b495ac (2017-02-20)- Update to e44f66a (2017-01-10)- Update to 64996b0 (2016-11-16)- Update to 4a0e54e (2016-10-20)- Update to a021d6e (2016-10-11)- Increase from 64 MB to 96 MB of RAM for GPU for RPi with 256 or 512 MB of RAM to be able to decode a 1080p h264 video in kodi- Update to ad8608c (2016-09-21)- Use "avoid_warnings=1" in config-rpi{,2,3}.txt (bsc#998973)- Clean up config-{rpi2,rpi3}.txt, dropping rpi1 defaults * On the rpi1 Model B rev. 2 performance results are similar with and without defaults, so in doubt leave our settings in config-rpi.txt until proven the defaults work better somewhere.- Use default frequencies in config-rpi{2,3}.txt (bsc#989511) * Defaults work well on rpi2 * Allow much higher frequencies on rpi3- get-from-git.sh: Update for -config-rpi* sub-packages - Update to 334f548 (2016-09-02) - Add post-install scripts to copy files to /boot/efi where needed. /boot/vc may be the mountpoint for boot.scr based installations or a symlink to /boot/efi. (bsc#996064)- Update to d0bc6ce (2016.08.23)- Update to 051aed7 (2016.07.15) - Simplify spec file a bit- Fix last changelog entry - Run format_spec_file in pre_checkin.sh to fix spec file header - Restore silently dropped defattr that breaks older builds- remove branding-openSUSE subpackage and split config into the 3 variants for (rpi, rpi2, rpi3)- Update to ac0c0bf (2016-05-20)- mark package as noarch (adds rpmlintrc) - split extra bootloaders into separate -extra subpackage- Enable aarch64 builds for Raspberry Pi 3- Update to 20958cd (2016-04-27)- Update to c065500 (2016-04-05)- Revert to last actual change b48c36f (2016-03-04) - Fix version bug found by Guillaume by using git-log (as intended)- Update to 845eb06 (2016-03-05)- Fix get-from-git.sh to get version even when packaged files are not in the last commit- Update Config.txt (add GPU mem option for 1024 MB version)- Update to 9cd1c6c (2016-02-29)- Update to 565197e (2016-02-19)- Update to cb2ffaa (2016-02-01)- Update to 7147575 (2016-01-13)- Update to 224c756 (2015-12-08)- Move files from /boot to /boot/vc to allow directly updating the FAT partition through a /boot/vc mount - Require the main package for the branding package- Update to ed611df (2015-11-25) * Clarifies licensing of start_*.elf files - Improve get-from-git.sh * Automate file removal and addition * Use date of last relevant change - Add branding-openSUSE subpackage, based on a to-do item in openSUSE:Factory:ARM JeOS package's uboot-image-install.in script * Update comment about zImage to reflect current U-Boot situation- Add get-from-git.sh script as source file (sr#341314)- Update to 4047fe2 (2015-10-23) - Throw out all non-free gfx sub-packages and files- Update to ba7a8fb (2015-10-11)- Update to e1e2823 (2015-08-15)- Update to c25cc51 (2015-08-13)- Update to cf20cb2 (2015-07-17)- Update to e8f6e12 (2015-06-22)- Update to 16044ee (2015-06-02)- Add %{_bindir}/raspividyuv- Update to 8aca576 (2015-02-14)- Update spec file to change ExclusiveArch to %arm to support the ARMv7 RPi- Update to 0080d30 (2014-11-04)- Update to e4afeda (2014-10-12)/bin/shobs-arm-9 16050860832019.11.19-lp151.4.6.1fixup_cd.datfixup_db.datfixup_x.datstart_cd.elfstart_db.elfstart_x.elf/boot/vc/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.opensuse.org/openSUSE:Maintenance:14954/openSUSE_Leap_15.1_Update_ports/0d0623f42dedb2102030d0d950ba7048-raspberrypi-firmware.openSUSE_Leap_15.1_Updatedrpmxz5noarch-suse-linuxELF 32-bit LSB executable, Broadcom VideoCore III, version 1 (SYSV), statically linked, stripped.utf-86b6c6317b866fcee8ec042a1c1c0c1f0708bda40372fa147a80c6b50a3577198?07zXZ !t/G]"k%m0a骙R 6}C["}̸ ]M ` #y>Α:${~N&Ƿ]k"A~TKV-Wkf  A#e(B @n)SdX 4)uiM9i9Zh)ً9o5}8^9˘.~ph#* v;c[T4`aBȍ:oXM6#kNpּ6nFSIMr_Ar'nS H2z=*~V-b)劰ڗ/$'Ptf4)IfaXAևF~e!y9ueyu$fY̜=}/ŴݤeMhK˝[ V;Ι!+s]7WPI[ƝΦa.',C*W0jup9 .{&6iߪ#'~q8b2_|p6w_!ޱ>՝ho wL8.]|2j g%mz; aYŴ_H]fӚ!ZqbJocr /Hxᩈcr`C{ /> D~]fW)$)wc̽gB!҄uN -Mj!klmy^ QOto% *GG Ԁa$d +@V BlЩ0'-ˊ0jơ.]wH+g&Sn_.kKo\X6eDBb/3gSz†p[6{} q9"В- j^=lK" M;۠=ɉz|0~RzQ4`_i]\}İƖ@0"dv+2% zIQ115nS?ˀf< (}ΔI+@i'Cy(ѦƫC.SQ YZ